-
Westek Electronics has announced the release of the Sorensen XG 1700 series DC power supplies, available in DC output voltages ranging from 0-6 volts to 0-600 volts.
-
Westek Electronics has released the Picotest M3510A and 3511A digital multimeters.
-
Voltech has released software for pre-compliance testing for harmonics, inter-harmonics and flicker.
-
Westek Electronics has released the Powerex BG2B Universal Gate Drive prototype board for IGBT pairs.
-
Schaffner has introduced a low leakage EMC/EMI, single-phase, 240 V AC filter series, designed for applications with test and measurement devices, IT equipment and automation systems.
-
Avtron has released the AC single-phase and three-phase load banks with dissipation capacities to 6 megawatts.
-
Janitza has released the DIN-rail mounting, UMG 511 Power Quality Analyser, designed to be capable of providing continuous monitoring and analysis of single and three-phase, three and four wire networks in accordance with EN 50160.
-
Schaffner has introduced the ECOSine Active 60 Amp filter, designed for harmonics mitigation in commercial and industrial electrical installations.
-
Westek Electronics has introduced a range of plug and play power supplies designed to permit intelligently controllable testing systems for a wide range of applications.
-
Westek Electronics has released the Smart Fieldmeter Digital (SFD) electromagnetic field monitor, a battery operated data logger designed to provide up to 55 hours of measurement operation.
-
Westek Electronics has released an electric, magnetic and electromagnetic field analyser suitable for a very wide range of applications.
-
Westek Electronics has released its Langer NNB21 Line Impedance Stabilisation Network (LISN) which is suitable for automotive conducted interference testing in accordance with CISPR 25/ISO 7637.
-
Schaffner has released FN 2200 DC EMC/EMI Filter series for photovoltaic panels, designed to prevent conducted RF from the inverter and significantly reducing the potential for radiated emission with the PV panels and wiring acting as antennas.
-
Westek Electronics has released a universal electro-magnetic field analyser that is said to be suitable for measuring magnetic and electric fields in the frequency range from 5 Hz to 6 GHz.
-
Schaffner has released the ECOSine Active filters, designed for harmonic distortion mitigation as well as power factor correction for three phase circuits.
-
Teseq has released the MD 4070 current sensor, designed to be used as a passive or active RF current sensor in the frequency range of 10 kHz to 400 MHz.
-
Westek Electronics has introduced the KoCoS EPPE C8 Power Quality and Power Line Monitor, suitable for busbar and feeder monitoring, individual load monitoring and power quality analysis in accordance with EN 50160.
-
Powertek has released a phase meter that is immune to noise and multiple zero crossings by utilising discrete Fourier analysis, rejecting any noise and distortion without the need for tracking filters.
-
Westek Electronics has introduced the Picotest U6200A, a three channel fully-isolated universal counter, designed to provide frequency measurements from 1 MHz to 400 MHz on channels 1 and 2, and from 375 MHz to 6 GHz on channel 3.
-
Schaffner has introduced the three-phase, four-wire EMC filters, suitable for conducted common mode and differential mode RFI attenuation to 30 MHz and higher.